Features

• High-speed, fully servo regulated, the culmination of our more than 30 years of professional experience.
• By integrating a rotary-style blistering and continuous motion cartoning module for packaging of pharmaceutical tablets and capsules, high efficiency and highly flexibility is achieved at a maximum output speed of 500 carton/min. It is ideal for mass production.
• Processes all common solid dose products and all types of forming materials.
• The machine can achieve 90 minutes of uninterrupted production, thanks to the blister module with forming material reels of up to 600mm in diameter and a waste material trimming cutter.
• Capable of all standard types of closure systems for cartons from tuck-in to hot-melt.
• The heart of a blister line is the connection between the blister module and cartoner module. In this line, the connection phase is truly innovative, due to the blister cards pick-up arms, vacuum conveyors, and the blister counting magazines that adopted precision servo technology. These accurately control blister transfer, faulty blister rejection, positioning, and feeding, etc., to assure the stability at a very high running speed.
• GMP-compliant cantilever (balcony type) layout for easy and pharmaceutically compliant cleaning.
• In the blister unit when the first reel’s film runs out in the blister module, it can automatically connect with the second without interruption to the machine (optional).
• The cartoning machine is truly ergonomic due to the innovative design whereby the product inserting device is placed at the rear. The conventional cartoning machine’s inserting device is placed at the front side, where it protrudes from the operation side and is less ergonomic.
• The cartoner module equipped a servo-regulated robot that can automatically load cartons when the carton magazine is low (optional).
• The blister and cartoner unit were optimally combined in this line and with less than 12 meters in length, it provides easy changeover for different sizes of formats and cartons.
• This line adopts the fully-enclosed structure and safety doors and aligns with the stringent safety standards.

Features

• Through the integration of a blister packer and cartoner module for packaging and cartoning of pharmaceutical tablets, capsules, and ampoules, this blister packaging line is an innovative response towards the need for high efficiency and low-cost operation, flexibility, and high productivity for mass batch production.
• Processes all common solid dose products and all types of forming material.
• The machine can achieve 180 minutes of uninterrupted production, thanks to the blister module, with forming material reels of up to 600mm in diameter and a waste material trimming cutter.
• Capable of all standard types of closure systems for cartons from tuck-in to hot-melt.
• The heart of a blister line is the connection between the blister machine and the cartoner. In this line, the connection phase is truly innovative thanks to rotary blister cards pick-up arms and the blister counting magazine that adopt precise servo technology. These accurately control blister transfer, faulty blister rejection, positioning, and feeding, etc., to assure the stability at high running speed.
• The blister and cartoner unit were optimally combined in this line, less than nine meters in length, it provides easy changeover for different sizes of formats and cartons.
• This line adopts the fully-enclosed structure and safety doors. It is in line with the most stringent European safety standards.

Features

• Through the integration of a blister packer and cartoner module for packaging and cartoning of pharmaceutical tablets, capsules, and ampoules, this blister packaging line is an innovative response towards the need for high efficiency and low-cost operation, flexibility, and high productivity for mass batch production.
• Processes all common solid dose products and all types of forming material.
• The machine can achieve 180 minutes of uninterrupted production, thanks to the blister module, with forming material reels of up to 600mm in diameter and a waste material trimming cutter.
• Capable of all standard types of closure systems for cartons from tuck-in to hot-melt.
• The heart of a blister line is the connection between the blister machine and the cartoner. In this line, the connection phase is truly innovative thanks to rotary blister cards pick-up arms and the blister counting magazine that adopt precise servo technology. These accurately control blister transfer, faulty blister rejection, positioning, and feeding, etc., to assure the stability at high running speed.
• The blister and cartoner unit were optimally combined in this line, less than nine meters in length, it provides easy changeover for different sizes of formats and cartons.
• This line adopts the fully-enclosed structure and safety doors. It is in line with the most stringent European safety standards.

Features

• Processes all common solid dose products and all types of forming material.
• The machine can achieve 180 minutes of uninterrupted production thanks to the blister module with forming material reels of up to 600mm in diameter and waste material trimming cutter (optional).
• Capable of all standard types of closure systems for cartons from tuck-in to hot-melt.
• The heart of a Blister Line is the connection between the Blister Machine and Cartoner. In this line, the connection phase is truly innovative thanks to two vacuum arms and the blister counting magazine that adopt precise servo technology. These accurately control blister transfer, faulty blister rejection, positioning, and feeding, etc., to assure the stability at high running speed.
• Since this line adopts a transfer belt to connect the Blister Machine and Cartoner, it provides easy changeover for different sizes of formats and cartons.

Features

• Processes all common solid dose products and all types of forming material.
• The machine can achieve 180 minutes of uninterrupted production thanks to the blister module with forming material reels of up to 600mm in diameter and waste material trimming cutter (optional).
• Capable of all standard types of closure systems for cartons from tuck-in to hot-melt.
• The heart of a Blister Line is the connection between the Blister Machine and Cartoner. In this line, the connection phase is truly innovative thanks to two vacuum arms and the blister counting magazine that adopt precise servo technology. These accurately control blister transfer, faulty blister rejection, positioning, and feeding, etc., to assure the stability at high running speed.
• Since this line adopts a transfer belt to connect the Blister Machine and Cartoner, it provides easy changeover for different sizes of formats and cartons.
• This line adopts the fully-enclosed structure and safety door, it is in line with the stringent safety standards.

Features

• The integration of blister packaging and cartoning systems achieves high efficiency and low-cost operation.
• Flexible and straightforward for multi-variety and small batch production.
• Optimally combined to form a compact line only five meters in length enabling installation in small production space.
• The output equals 120 blisters and 100 cartons per minute – offering a maximum blister size of 135×120 mm and a carton format of up to 150x115x50mm.
• Central operation via touchscreen HMI system.
• Blister feeder (universal or dedicated), which feeds standard shaped products quickly and efficiently.
• After filling, a color camera subsequently checks the products and it can reject faulty blisters automatically (optional). Only perfect blisters are transferred to the cartoner unit.
• Sealing of the blisters is carried out by a device that combines pneumatic and hydro-form advantages that can easily adjust sealing pressure.
• When the machine stops, the heat sealing mold can rise automatically to prevent hot air from getting into the blister pockets and product effectiveness is preserved.
• The material traction system uses a precise servo motor to achieve stable and accurate running.
• The blister length can be set freely through the touchscreen User Interface, which reduces the time for a format changeover.
• The blister magazine in the cartoner unit is carried out by a servo- motor. Inside the magazine, the blister cards are counted and when they free fall, are then held in position by the transfer belt.
• The leaflets are isolated from the bottom of a pile magazine, then pulled off and folded. Leaflets can be folded from one to four folds, according to the customer’s requirements.
• In case there are no cartons and/or no blister cards, the leaflet folder will be automatically be suspended without stopping the machine – a new leaflet is then ready to be inserted in the good carton.
• In the carton conveyor chain, the cartons are closed automatically. By using the digital position indicator straightforward adjustments are achieved.
• The carton closing station is for tuck-in and the hot-melt unit can also be integrated into the cartoner.
• Thanks to its toolless size-changing the machine production times are increased and the machine idle times are reduced.
• The change-over can be carried out by the operator with a simple and fast procedure due to simple, fixed-position parts, digital indicators for the adjustments, and complete accessibility.
• The blister line adopts a transparent cover which assures safe operation. All areas of the line are visible so operating personnel can keep an eye on the production steps.

Features

• High-speed Blister Packaging Machine, fully servo regulated, the culmination of our more than 30 years of professional experience.
• The main structure has a vertical partition to separate the drive section (rear) from the operating zones (front).
• GMP-compliant cantilever (balcony type) layout for easy, pharmaceutically compliant cleaning.
• Accommodates forming material reels of up to 600mm in diameter and a waste material trimming cutter, which allows production to run uninterrupted for approximately 90 minutes, therefore, reducing the material replacement frequency.
• Equipped with integrated forming material splicer to enhance efficiency during material replacement.
• The upper and lower plates adopt a contact heating method that significantly reduces the forming temperature, thus the shrinkage, deforming of packaging material and power consumption are minimized.
• Equipped with format locking, positioning system, and quick-fitting, tool-free design achieves extremely straightforward format changeover.
• Larger area of forming station, rotary sealing station, high speed of embossing and punching station, suitable for mass batch production.
• In the sealing station, when the machine stops, the sealing roller can rise automatically to prevent hot air from getting into the blister pockets, so that, medicine effectiveness is preserved.
• Using a quick-fitting design enables the replacement of lidding material easily within 10 seconds.
• Equipped with an integrated lidding material splicer to enhance efficiency during material replacement.
• Adopts transverse cutter which easily collects its blister card and rejects faulty blister.
• Window frame type no-waste-trimming cutter saves packaging materials (option).
• The blister indexing length can be set easily through touchscreen HMI User Interface, which reduces the time for a format changeover.
• All the main parts are made of premium stainless steel and aluminum-alloy material and machined by advanced high-precision CNC tooling machines.
• Adopts digital position indicator achieves straightforward adjustment.
• Ergonomic design sliding door assure safe and convenient operation.

Features

• The main structure has a vertical partition to separate the drive section (rear) from the operating zones (front).
• GMP-compliant cantilever (balcony type) layout for easy, pharmaceutically compliant cleaning.
• Adopts digital position indicator achieves straightforward adjustment.
• Equipped with format locking, positioning system, and quick-fitting, tool-free design, achieves extremely straightforward format changeover (new).
• In the sealing station, when the machine stops, the heating sealing mold can rise up automatically to prevent hot air from getting into the blister pockets so that medicine effectiveness is preserved.
• Sealing pressure adopts the gas-hydraulic pressure cylinder where the pressure can be set easily according to the sealing area (commonly, a larger sealing area requires higher pressure) (new).
• This machine is equipped with an integrated forming material splicer to enhance efficiency during material replacement.
• The upper and lower plates adopt a contact heating method that significantly reduces the forming temperature, thus the shrinkage, deforming of packaging material, and power consumption is minimized.
• Using a quick-fitting design enables the replacement of lidding material easily within 10 seconds.
• The blister length can be set through touchscreen HMI User Interface, which reduces the time for a format changeover.
• A larger area of the working station, the width of forming, sealing, and embossing stations reach 180mm, suitable for mass production.

Features

• Because the item is filled in thermoforming pocket, it can adopt universal or vibratory feeder which is of low cost and easy to operate.
• The Alu/PVC sealing station adopts continuous rotary style wheel format thus increases the machine speed.
• While Alu/PVC sealing and embossing, the tropical aluminum is transferred to tropical aluminum forming station.
• The tropical Alu forming station has larger forming area archive larger output requirement
• The second sealing station has larger area to allow the plastic thermoforming blister package to be sealed with formed tropical Alu at higher output capacity.
• After second sealing, the Alu-PVC-Alu web moves to punch station. The punch station can adopt the cross type punching where the trimming waste is about 1mm between two blisters which can save film material.
• There are two waste tanks to collect waste material alternatively.
• The machine adopts enclosed structure and a safety cover.
• Pinhole detection system for quality assurance of blister packaging (optional).

Features

• Equipped with automatic format locking, the positioning system achieves an extremely straightforward format changeover (new).
• In the sealing station, when the machine stops, the heat-sealing mold can rise automatically to prevent hot air from getting into the blister pockets, so that, product effectiveness is preserved.
• Sealing pressure adopts the gas-hydraulic pressure cylinder where the pressure can be set easily according to the sealing area (commonly, a larger sealing area requires higher pressure) (new).
• All the main parts are made of premium stainless steel and aluminum-alloy material and machined by advanced high-precision CNC tooling machines.
• Accommodates two forming material reels. One of the reel’s diameters can reach up to 600mm. If it equips the waste material trimming cutter (optional), it could allow production runs of approximately 90 minutes, therefore, reducing the material replacement frequency.
• This machine is equipped with an integrated forming material splicer to enhance efficiency during material replacement.
• Using a fast lock method enables the replacement of lidding material easily within 10 seconds.
• Add a perforation station to separate the perforation from the embossing station. Conventionally, perforation and embossing remain in one station, but this will influence the clarity of each (optional).
• The blister length can be set easily through touchscreen HMI User Interface, which reduces the time for a format changeover.

Features

• It is suitable for plastic thermoforming and aluminum cold-forming blister packaging.
• All the main parts are made of premium stainless steel and aluminum-alloy material and machined by advanced high-precision CNC tooling machines.
• Exquisite chamber transparent cover (assures safe operation) and special surface treatment of stainless steel add to its elegance.
• The machine can achieve 180 minutes of uninterrupted production thanks to a forming material reel of up to 600mm in diameter and a waste material trimming cutter (optional).
• Equipped with an integrated forming material splicer and automatic format positioning system to achieve straightforward format changeovers.
• Using a fast lock method enables the replacement of lidding material easily within 10 seconds.
• Separation of drive and operating zones are in compliance with pharmaceutical GMP requirements.
• Material drag system adopts a precise servo motor to achieve stable, accurate running and allows blister length to be set easily.
• In the sealing station, when the machine stops, the heat-sealing mold can rise automatically to prevent hot air from getting into the blister pockets, so that, product effectiveness is preserved.
• Sealing pressure adopts the gas-hydraulic pressure cylinder, so the pressure can be set freely according to the sealing area (commonly a larger sealing area requires higher pressure).
• This machine can be custom-built to produce plastic thermoformed trays with maximum forming depth reaching 50mm.

Features

• The shrinkage of the packaging material is minimized to ensure the synchronization of the blister pocket by means of a double servo-regulated drag system.
• The use of aluminum offers a nearly complete barrier for water, light, and oxygen, allowing an extended product expiration date.
• The punch station can adopt the cross type where the trimming waste is about 1mm between two blisters which can save more material.
• It can connect with a cartoner to form an Automatic Blister Packaging Line.

Features

• Extremely straightforward format changeover.
• All the main parts are made of premium stainless steel and aluminum-alloy material and machined by advanced high-precision CNC tooling machines.
• Sealing pressure adopts the gas-hydraulic pressure cylinder, so the pressure can be set freely according to the sealing area (commonly a larger sealing area requires higher pressure).
• The blister length can be set easily through touchscreen HMI Human Machine Interface, which reduces the time for a former changeover.
• Material drag system adopts a precise servo motor to achieve stable, accurate running and allows blister length to be set easily.
• Separation of drive and operating zones are in compliance with pharmaceutical GMP requirements.
• The upper and lower plates adopt a contact heating method that significantly reduces the forming temperature. Thus the shrinkage, deforming of packaging material and power consumption are minimized.
• Using a fast lock method enables the replacement of lidding material easily within 10 seconds.
• It is suitable for plastic thermoforming and aluminum cold-forming blister packaging.
• This machine can be custom-built to produce plastic thermoformed trays with maximum forming depth reaching 50mm.

Features

• Compact, space-saving design for convenient blister packaging.
• Fast set-up time and minimal training required.
• Tool-less changeover for formed parts.
• Bring your blister packing in-house instead of booking time on production lines or outsourcing to a third party – minimizes delays, allowing your new food supplement/drug product to get to market sooner.
• Quick & easy setup – no specialist knowledge is required to operate, so an engineer is not needed to be present.
• Compact, portable design.
• Fully cGMP compliant, so it is quick to clean – requires only 5 minutes.
• Fast tool changeover reduces down-time between production batches.